Grid software for co-ops & city utilities

Run tomorrow’s grid today.

Ampline forecasts load 48 hours ahead and dispatches batteries, solar and flexible demand on its own, so co-ops and city utilities shave the evening peak instead of buying it.

LOAD 412.6 MWFORECAST ERROR 2.1%STORAGE 68%PEAK SHAVED TODAY −39.4 MW

01 The problem

The six o’clock problem.

Members get home, the air conditioning kicks on and rooftop solar fades. For a few hours a day the whole territory leans on the most expensive power on the market, and one bad hour can set your capacity bill for the next twelve months.

4 hrsa day drive 31% of a typical co-op’s wholesale spend*
$96kper MW-year in capacity charges, set by the peak*
1 hourthe single coincident peak your transmission bill is based on

*Illustrative figures for a mid-size co-op. The glowing wall behind the skyline is the demo territory’s load on a July day.

02 Forecast

See the peak two days before it arrives.

Ampline blends weather ensembles, calendars and every interval meter you have, retrained on your own feeders each night. Hot blocks glow on the map hours before the load shows up.

NEXT 48 H · RIVERBEND DEMOHover or tap a bar
NOW 06:00+12 H+24 H+36 H+48 H
2.1%day-ahead error (MAPE)
4.8%two days out
15 minresolution, every feeder
  • WeatherThree ensembles, refreshed hourly
  • MetersAMI interval data, 15-minute
  • CalendarsSchool terms, holidays, game nights
  • AdoptionRooftop solar and EV growth by feeder

03 Dispatch · live replay

Batteries that already know the plan.

Charge on midday solar, discharge into the evening peak, keep a reserve for storms. Drag the timeline to replay a July day on the demo co-op. The yards on the map follow along.

Riverbend Electric Co-op (demo) · Feeder group NorthIDLELIVE REPLAY
ForecastWithout AmplineNet loadDischargeCharge
13:00
Peak shaved0.0 MWvs. load without batteries
Saved today$0energy + capacity value
Fleet charge50%
CO₂ avoided0 tvs. gas peaker

04 Programs

Every garage is a small power plant.

Home batteries, EV chargers and smart thermostats your members already own, enrolled in programs they actually like, and dispatched alongside your utility-scale storage.

Bring your own battery

38 MW4,820 homes

Home batteries discharge for up to two hours on peak days and always keep 30% for the household.

$12 a month bill credit · concept

Managed EV charging

14 MW2,140 chargers

Cars charge after 22:00 by default. One tap on “I need it now” overrides the plan, no questions asked.

Half-price night rate · concept

Thermostat events

9 MW11,900 homes

Pre-cool at 15:00, a two-degree drift at 18:00, never more than twelve events a summer.

$40 enrollment credit · concept

05 Storm mode

When the weather turns, the batteries hold.

Thirty-six hours before forecast gusts pass 50 mph, Ampline raises every reserve floor, tops up the fleet and lines up critical loads for islanding. Your operators see the plan before anything moves.

A line of steel transmission towers crossing dry grassland under a dark, heavy storm front
T − 36 H·GUSTS PAST 50 MPH
  1. T − 36 HReserve floors raised from 15% to 60% across all yards
  2. T − 12 HFleet charged to 95%, EV and thermostat events paused
  3. LANDFALLHospital, water plant and two shelters ranked first for islanding
  4. AFTERRestoration list by feeder, sorted by members without power
14 hof backup for the regional hospital from Yard 2 at full load, in the demo storm scenario.

06 Platform

Six modules. One source of truth.

FORECAST 01

Load & solar forecasts

48 hours ahead, every feeder, every 15 minutes, with confidence bands your planners can trust.

DISPATCH 02

Automatic dispatch

Re-plans every five minutes against forecasts, prices and the reserve floors you set.

PROGRAMS 03

Member programs

Enroll, notify and credit members for batteries, EVs and thermostats from one place.

SETTLE 04

Savings you can audit

Every megawatt-hour logged against the price it avoided, ready for the board and the regulator.

CONSOLE 05

Operator console

Approve, override or pause any asset. Every action is signed, timestamped and reversible.

PLAN 06

Storage siting

Hosting capacity and the next battery site, scored from the same models that run dispatch.

SpeaksDNP3Modbus TCPIEC 61850OpenADR 2.0bIEEE 2030.5MultiSpeakGreen Button CMDMQTT over TLS
Read-only by defaultNothing is written until you enable an asset.
Your cloud or on-premData never leaves your tenant.
Operators decideAny setpoint can be vetoed in one click.
Full audit trailSeven years of signed logs.

In the field

The map is a model. The grid is real.

Lines at dusk, panels at sunset, turbines on the ridge and a city switching on at six. Ampline reads every one of them through the protocols above, so the territory you scrolled through is the one your crews drive past.

Steel transmission towers and power lines silhouetted against a deep blue dusk sky, an orange glow on the horizon
138 KV TIE LINE·DUSK PEAK
Rows of solar panels on a large array at sunset, mountains silhouetted against an orange sky
SOLAR FARM A·22 MW
Wind turbines silhouetted against a blue evening sky with a thin crescent moon
WIND RIDGE·31 MW
Aerial view of a city at night, its street grid glowing orange all the way to the horizon
THE CITY AT 18:00·412 MW

07 Rollout

Live in six weeks, without replacing your SCADA.

WEEK 1–2

Connect

Read-only links to meters, SCADA and the battery controllers you already own.

→ Data health report
WEEK 3

Learn

Models train on three years of history. You see forecast accuracy before anything moves.

→ Accuracy scorecard per feeder
WEEK 4–5

Shadow

Ampline proposes dispatch; your operators compare it with what they actually did.

→ Side-by-side savings memo
WEEK 6

Dispatch

Automatic control goes live feeder by feeder, inside limits your team signs off.

→ First peak shaved

08 Pricing · concept

Priced per megawatt you control.

Pilot

$24kflat · 90 days

One feeder group, up to 10 MW of storage, shadow mode and then live dispatch.

  • Forecast
  • Dispatch
  • Savings memo

Co-op MOST CHOSEN

$1,900per MW · per year

Every module for territories up to 150 MW of managed storage and programs.

  • All six modules
  • Member programs
  • 24/7 operator line

Utility

Custommulti-territory

On-prem deployment, market bidding and several control rooms on one plan.

  • On-prem
  • Market bidding
  • Dedicated team

Concept pricing for illustration only.

Does Ampline replace our SCADA or ADMS?

No. It sits beside them, reads what they already collect and only writes setpoints to assets you explicitly enable.

Who has the final say on dispatch?

Your operators. Every plan is visible 24 hours ahead, any setpoint can be vetoed in one click and storm mode always asks first.

Which batteries does it work with?

Any controller that speaks Modbus TCP, DNP3 or IEEE 2030.5, plus home batteries and chargers enrolled through OpenADR.

What if the forecast is wrong?

Dispatch re-plans every five minutes. Reserve floors are hard limits, so a surprise never drains the fleet below what you set.

How do we prove the savings?

Against a baseline you agree with us in week three. The settlement module logs every MWh with the price it avoided.

Where does our data live?

In your own cloud tenant or on your servers. Ampline staff only see it when you open a support session.

09 Demo

See last summer’s peaks, shaved.

Send one year of interval data. In a 30-minute call we replay your worst week and show exactly what Ampline would have dispatched, hour by hour.

  • Your own feeders, not a sample utility
  • A savings estimate your board can check
  • No integration work before you decide

Request a replay of your territory

40 MW
Peak you could shave31 MW
Indicative value / yr$3.4M

Thanks! This is a concept website by Doris Studio, so nothing was sent and no one will call.